Products

Elevators & Spiders

  • Slip type spider & elevator air/manual operated, 350 & 500 ton
  • Hinge casing spider 20" to 36", capacity from 200 to 500 ton
  • Centre latch slip type elevator, manual operated, 1.315" thru 7-5/8", 40 to 200 ton
  • Centre latch elevator manual operated for tubing, range 1.660" to 5-1/2 , 35 to 150 ton
  • Centre latch elevator air/manual operated for drill collar, range 3-1/8" to 9-1/2 , 35 to 150 ton
  • Centre latch elevator air/manual operated for drill pipe, range 2-3/8" to 6-5/8" , 150 to 500 ton
  • Side door elevator manual operated, range 3-1/2" to 36", 100 to 350 ton
  • Single joint pick up elevator, range 1.315" to 36", 5 to 8 ton
  • Weldless elevator links, 36" to 240" long, 150 to 500 ton
 

Slips and Safety Clamps

  • Casing slip, type CMS-XL range 6-5/8" to 36"
  • Drill collar slip, type DCS-S, DCS-R & DCS-L range 3" to 14"
  • Rotary hand slip type SDS-SDML, SDXL 2-3/8" to 7"
  • Safety clamp, type T, 1-1/8" to 4-1/2"
  • Safety clamp, type C, 3-3/4" to 36"
  • Safety clamp, type MP, 4-1/2" to 36"
 

Manual & Hydraulic Power Tongs

  • Manual tong, type LF, range 2-3/8" to 8-5/8"
  • Manual tong, type C, range 2-3/8" to 10-3/4"
  • Manual tong, type B, range 3-1/2" to 13-3/8"
  • Manual tong, type B Extended, range 13-3/8" to 30"
  • Manual tong, type DB, range 3-1/2" to 17"
  • Manual tong, type SDD, range 4" to 17"
  • Power tong, Eckel & Farr, 2-3/8" thru 20"
  • Explosion proof motor driven hydraulic power unit
  • Engine driven hydraulic power unit
 

Fishing Tools

  • Overshot Series 70 & 150, 2-5/8" to 11-3/4" OD
  • Spear, 1-1/8" to 20"
  • Coarse thread type safety joint 3-1/2" & 4-1/2" IF conns
  • Fishing magnet 5" to 11-1/2" OD
  • Ditch magnet, 36" long
  • Reverse circulation junk basket, 5-1/8" to 11" OD
  • Flat bottom junk mill, 4-1/8" to 17-1/2" hole size
  • Type "Z" oil jar, 3-1/8" to 8" OD
  • Jar intensifier 4-3/4" to 8" OD
  • Fishing bumper sub 4-3/4" to 8" OD
  • Casing patch 7" to 13-3/8" OD
  • Taper tap, 3-3/4" to 8" OD
 

Down Hole Tools

  • Integral blade string/near bit stabilizer, 5-7/8" to 17-1/2" OD
  • Welded blade string/near bit stabilizer, 5-7/8" to 36" OD
  • Roller reamer string/near bit 5-7/8" to 26" OD
  • Casing scraper, 4-1/2" to 13-3/8" OD
  • Hydro mechanical drilling jar, 4-3/4" to 8" OD
  • Tri-con mill tooth/TCI rock bit, 5-7/8" to 26" OD
  • Hole opener, 8-1/2" to 36" OD
 

Cementing Pump

  • Halliburton triplex cementing pump, 4-1/2' plunger, 8V-71 diesel engine, Allison transmission, AMOT
    over speed & water temp. shutdown device, 2800 master controller & CHALWYN valve.
  • Centrifugal pumps, ex-proof motor & engine driven.
 

Tubular

  • Spiral drill collars 9-1/2" OD, R-2, with 7-5/8" Reg conns.
  • Spiral drill collars 8-1/2" OD, R-2, with 6-5/8" Reg conns.
  • Spiral drill collars 8-1/4" OD, R-2, with 6-5/8" Reg conns.
  • Spiral drill collars 6-1/2" OD, R-2, with 4-1/2" Reg conns.
  • Spiral drill collars 4-3/4" OD, R-2, with 3-1/2" Reg conns.
  • Pony drill collar 4-3/4" to 9-1/2", 5 to 20 ft long.
  • Hevi-wate drill pipe, 5" OD, R-2, with 4-1/2" IF conns.
  • Hevi-wate drill pipe, 4-1/2" OD, R-2, with 4" IF conns.
  • Hevi-wate drill pipe, 3-1/2" OD, R-2, with 3-1/2" IF conns.
  • 3-1/2" OD, G105/S135 drill pipe, #13.30, R-2, 3-1/2" IF conns.
  • 5" OD, G105/S135 drill pipe, # 19.50, R-2, 4-1/2" IF conns.
  • 5-3/4" to 11-3/4" OD wash pipes & accessories.
  • 5" thru 36" OD casings.
  • Pup joint, 3-1/2" & 5" OD, 5 to 20ft long.
  • Lift sub, 2-3/8" IF to 6-5/8" Reg conn.
  • Crossover subs, 3-1/8" to 10" OD
  • Bit subs, 3-1/8" to 10" OD
  • Double subs, 3-1/8" to 10" OD
  • Integral pump in subs & side entry subs with Weco conn
  • Integral casing swages 7" to 20" OD
 

Offshore Container

  • 6 ft x 6 ft x 8 ft offshore container
  • Offshore waste basket
  • Offshore cargo basket
  • Offshore pallet rack
  • Items with ABS, load test certification & painted to suit offshore application
 

Miscellaneous

  • Kelly valves, 2-3/8" IF to 6-5/8"Reg conns, 5,000 to 15,000 PSI.
  • Inside BOP, 2-3/8" IF to 4-1/2" IF conns, 5,000 to 15,000 PSI.
  • Kelly spinner type SSW-10, 3-1/2" to 5-1/2".
  • Kelly spinner type SSW-30, 2-7/8" to 9-1/2".
  • Kelly spinner type SSW-40, 3-1/2" to 9-1/2".
  • Kelly Bushing for 3-1/2" to 5-1/4", square & hex
  • Master bushing for 20-1/2" to 49-1/2" rotary table.
  • Casing bushing for 20-1/2" to 49-1/2" rotary table.
  • Insert bowl No. 1, 2 & 3 for above.
  • Tri-cone bit breakers
  • SBR, blind, variable & pipe ram blocks for NL Shaffer, CIW & Hydril.
  • Single/Double ram type BOP, CIW & NL Shaffer
  • Chiksan swivel, loop & pup joint, 1" to 4" OD.
  • Tong torque system
  • Stabbing guides for tubing, drill pipe & casing
  • Hydraulic, air & manual mud bucket
  • Mechanical & air inflatable thread Protectors